Back
|
Drying Times Are Based On Air Flowing Over The Surface. This Removes The Fumes And
Is The Biggest Factor In Curing.
|
|
Technical Data
|
| Dust Free Time |
1 Hour |
| Tack Free Time |
1 1/2 Hours |
| Taping Time at 77º F |
Overnight |
| Flexibility at 1 week over 1/8" Rod |
No Effect |
| 80 IN-LBS Direct at 1 week |
No Effect |
| Pencil Hardness (Unaccelerated) |
|
| 48 Hours |
B |
| 2 Weeks |
2H |
| Salt Spray - 1000 Hours |
No Effect |
| Humidity - 1000 Hours |
No Effect |
Dielectric Strength (Off White Only)
|
Approximately 2000 Volts per Mil over Steel |
| |
| Graffiti Resistance Excellent |
|
| Magic Marker and Sanford #1500 felt tip marker
can be removed with denatured alcohol.
|
| Solvent Resistance - 2 weeks |
Excellent |
| Methyl Ethyl Ketone |
Excellent |
| Xylene |
Excellent |
| Chemical Resistance - 10% Solutions |
Excellent |
| Ammonium Hydroxide |
Excellent |
| Acetic Acid |
Excellent |
| Phosphoric Acid |
Excellent |
| Sulfuric Acid |
Excellent |
| Hydrochloric Acid |
Excellent |
| Non-Photochemically Reactive |
Meets Rule #66 |
| Theoretical Coverage |
400sq. ft. per gallon (3 rolled on coats) |
| Flash Point (PMCC) |
78º F |
